Presentation of the developed solutions
In the following the solutions are presented as they
have originated
from the development of home automation and HVAC solutions. The most
advance is a heat recovery unit and linking appliances to the Internet.
|
Decentralized Heat Recovery
Having the windows
closed an air
stream is drawn out from the room and hands over part of its heat
content but also humidity to an air exchanger.
When fresh filtered air is blown into the room part of the heat and
water is taken from the static heat exchanger. There are two silent fans in cyclic operation ensuring high
fan efficiency. For
increasing the thermal efficiency
coupling with a second application connected over Ethernet cable is
recommended.
Resulting from client
requirements
an absolutely silent operation is essential for sleeping rooms. The
fans RPM is therefore reduced depending on time or light intensity.
In case of using the original cover of the rolling blind chamber the
appliance can be hardly detected.
Die
Air temperature data may be recorded on a server in the cloud and
presented via HTML page (also for energy monitoring). The appliance is
offered as sketch for DIY, including sources for the parts. The
controller and the code is offered separately since outside of sleeping
rooms the appliance may be operated with cyclic timers. The
corresponding application may work in passive mode or may be connected
via power line for the fan.
The main benefits of
the solution:
-
Parts account
to approx. 200€-250€ per unit, depending on the size and
implementation.
-
Energy saving
(only small power demand).
-
Filtered
intake air.
-
Very silent
operation.
-
Sophisticated
options for time and temperature controlled optimization.
-
May be
enhanced with energy monitoring using manual meter input or S0-interface
.
-
May be
connected with central heating units, remote control using nomadic
devices.
-
No additional
communication cost.
-
Not
compromising IT-security since no port of the firewall has to be opened
when accessing data on the server.
|
|
Server based energy monitoring
If internet connection is available data may be
transmitted cost
efficiently to an server, even if the intranet is secured via firewall.
A programmable controller may read 8-16 temperatures and analogous
voltages transmitting data in defined intervals to the server. The
IT-system is left untouched (router, firewall). In case of a flat
Internet rate no cost occur.
The commercial offer comprises the ordering of the
senors,
programming on the controller and for the server (PHP) and the
graphical representation. Furthermore knowledge about heat
engineering helps defining the problems and introducing efficient
solutions reducing energy demand.
The 32bit version offers 16 temperature sensors,
allowing more complex monitoring services.
|
|
Server based energy monitoring and remote
control of appliances
Networking of devices via Internet protocol allows the
erection of
complex systems including remote monitoring and remote control for
ventilation and heating systems, also combining them. The system is
based on an Internet enabled controller supporting sensors and actors.
In the simplest case house thermostats may be controlled by one
controller using one relay. It makes however sense adding one
temperature measurement. Third party servers may be used for exchanging
data between user and controller because data is encrypted.
The commercial offer comprises the ordering of the
sensors and
actors, programming of the controller and for the server (PHP) and the
graphical representation. Furthermore knowledge about heat
engineering helps defining the problems and introducing efficient
solutions reducing energy demand. Specification, procurement and
project management is also offered.
|
|
Similar to the energy monitoring, you may log water,
paper consumption etc.
|
|
Reduce pain (Repetitive
Strain Injury Syndrome ) in your shoulder by employing an
ergonomic arm position. The tested solution provides an ideal working
platform for the (cordless) mouse in an arm chair, but may be adapted
for office chairs.
In this description
you find more details avoiding the gamers thumb.
|
|
The developed version
has an
upholstered rest for your palm and adapts to the round form of the
mouse mat. Two hook and loop fasteners are fixing the mouse pad more
securely to the arm rest of the chair. Attention, direct imports from
China bear the risk of heavily contaminated mouse pads. For designing the final product a survey was created. Please give feedback so we may design the right product for you.
|
|